Pre-sale questions

Which product is right for your exact requirements
Post Reply

Pre-sale questions

Post by Guest » Fri Nov 19, 2004 3:36 pm

I have questions about the ADC-212/3 Oscilloscope and the PICO software included in PICO Automotive Diag. Kit

1- How can we track/log multiple channels using ADC-212/3. Is this Os. Scope itself capable or do we need an additional device to make it multichannel to simultaneously compare data like engine vacuum, compression, temperature, RPM, exhaust pulses, charging current, spark plug condition, exhaust CO, ignition timing, air fuel ratio, HT voltage & leads condition etc.

2- Will it be beneficial to have such a kit in Pakistan e.g. its compatibility with Pakistani Autmobile market, weather etc?

3- Can FirstLook sensor be used with liquid lines e.g. petrol, water etc to measure its pressue and pulses.

4- Are you looking for your product's dealer in Pakistan. We are interested in being your dealer. We can promote your products at national level.

5- Do you provide training to your customers/dealers before or after the sale of the kit.

6- Do you have break testing equipment?

Thanks in Advance,

Adnan Naseer Ahmad
CNG-Advance and Automobile Diagnostic Center
Islmabad, Pakistan

Ph: 092-333-5113178

User avatar
Advanced User
Advanced User
Posts: 71
Joined: Wed May 07, 2003 9:43 am

Post by ricardo » Fri Nov 26, 2004 3:20 pm


Thank you for your enquiry. I have replied to your questions via email.

Best Regards,

Ricardo Paloschi
Sales Engineer
Forum Moderator

Post Reply