Current logger PLCM3

Post any questions you may have about our current range of USB data loggers
Post Reply
junedfird
Newbie
Posts: 0
Joined: Thu Jan 03, 2013 11:40 am

Current logger PLCM3

Post by junedfird » Sat Mar 23, 2013 6:59 am

Hi Peter/Martyn,

Can this logger be used to log voltages as well?

Is there any instrument which can log both current and voltages to find out POWER in kW?

Thanks!

Juned

Martyn
Site Admin
Site Admin
Posts: 3331
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Current logger PLCM3

Post by Martyn » Wed Apr 03, 2013 7:49 am

The CM3 cannot be used for power measurements, it only takes values not phase. You would need a scope and the following application note gives some guidance on what you would need

http://www.picotech.com/applications/ma ... lysis.html
Martyn
Technical Support Manager

Post Reply