Picoscope 2205 MSO do not get level 0V at Channel B

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
khanhtanvn88
Newbie
Posts: 0
Joined: Thu Mar 21, 2013 2:03 pm

Picoscope 2205 MSO do not get level 0V at Channel B

Post by khanhtanvn88 » Thu Mar 21, 2013 2:21 pm

Please help me to solve this problem. My Oscilloscope 2205 MSO have 2 channel Analog A and B, when i connect 2 probes to the oscilloscope simultaneously, the channel A gets the 0 Voltage very well but the level of channel B always remains nearly -0.6 Volt. How can i get the level 0V at channel B like the channel A. Thank you so much!
Attachments
Picoscope 2205 MSO.doc
I capture the picture in word format
(147.5 KiB) Downloaded 124 times
Top
Martyn
Site Admin
Site Admin
Posts: 3376
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Picoscope 2205 MSO do not get level 0V at Channel B

Post by Martyn » Fri Mar 22, 2013 12:39 pm

Please post a psdata file so that we can check all your settings, and the text from Help->About. Thanks
Martyn
Technical Support Manager
Top
khanhtanvn88
Newbie
Posts: 0
Joined: Thu Mar 21, 2013 2:03 pm

Re: Picoscope 2205 MSO do not get level 0V at Channel B

Post by khanhtanvn88 » Fri Mar 22, 2013 12:43 pm

Ok! i will post latter. Thank alot!
Top
Post Reply

Return to “PicoScope 6 for Windows”