Test and Measurement Forum

Picoscope meter, minimum frequency

Forum for discussing PicoScope (version 5)

Picoscope meter, minimum frequency

Postby Tresco » Thu Nov 18, 2004 2:31 am

what is the minimum frequency that can be measured on the AC Meter and Freq Meter?

Mine seems to drop-out below 50Hz (ADC-42)

I'd like to be able measure down to 0.5 Hz - could this be considered for future software updates?

thanks...
Tresco
Active User
Active User
 
Posts: 5
Joined: Thu Nov 18, 2004 2:15 am
Location: Australia

Postby Sarah » Fri Nov 19, 2004 12:13 pm

Hi

Thank you for your post

The best way to measure lower frequencies is to use Picolog and increase the scan time. This should enable you to see lower frequencies.

Hope this helps

Best Regards
Sarah
 

AC Voltmeter in picoscope

Postby Tresco » Sat Nov 20, 2004 3:43 am

could you please advise what is the minimum frequency that the AC Voltmeter will measure (in picoscope)
Tresco
Active User
Active User
 
Posts: 5
Joined: Thu Nov 18, 2004 2:15 am
Location: Australia

Postby Sarah » Thu Nov 25, 2004 3:33 pm

Hi

Thank you for your post.

I am unable to give an exact figure as to the minimum value. However you will find the measurement function on the trace view to be a better measuring tool.

Hope this helps

Best Regards
Sarah
 


Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests