One channel signal delay

Post general discussions on using our drivers to write your own software here
Post Reply
velikigrizli
Newbie
Posts: 0
Joined: Fri Mar 08, 2013 1:21 pm

One channel signal delay

Post by velikigrizli »

Hi all :D

Imagine I have active current probe that for example has time delay about 50nS.

How to make delay be compensated by the software ?

For example if current probe channel has 50nS delay , delaying other channel for 50nS would make readings accurate.

For example Tektronics scopes has that option.

Is there any way to make this works, or can You(developers) make that option into new software version ?

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: One channel signal delay

Post by Martyn »

We have reference waveforms which can be moved in the time axis, but not active channels at the present time. I will pass the information to our development team for consideration in a future release.
Martyn
Technical Support Manager

Post Reply