Using multiple TC-08's

Forum for discussing PicoLog
Post Reply
Posts: 0
Joined: Fri Feb 08, 2013 9:27 am

Using multiple TC-08's

Post by mperman » Wed Mar 06, 2013 10:35 am

Hi All,
Has anyone used more than two TC-08's on one PC?
We have a need to run several together now: up to 4 or 5 for 32-40 K type thermocouples. The test will be started at one time with all results logged together.
I have experienced some issues with USB port management on the PC with 2 TC-08's together, but overcome them by using alternate ports.
I wonder how the software copes with 4 or more units?


Site Admin
Site Admin
Posts: 2847
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Using multiple TC-08's

Post by Hitesh » Wed Mar 06, 2013 11:00 am

Hi Martin,

I've tested with 3 TC-08 devices on my PC using PicoLog - the driver will allow up to 20 units to be connected.

For multiple units we recommend the use of a powered USB hub.

I hope this helps.

Software Dev. Engineer

Post Reply