Test and Measurement Forum

ADC12 using usb/parallel converter

Forum for discussing PicoLog

ADC12 using usb/parallel converter

Postby Patrick Wallis » Tue Nov 16, 2004 2:46 pm

I have been using the picologger successfully with a PC with a parallel port but on transferring to a new PC which needs the usb-parellel converter it won't collect data at 100ms intervals.

I have tried downloading the latest version of the Drivers for ADC12 (now on version 5.11.6) but the same problem occurs - sampling at 100ms for 2400 points takes about 10 seconds.

The ssytem works fine if I sample at 1sec or 1000ms.

Any ideas?
Patrick Wallis
Posts: 1
Joined: Tue Nov 16, 2004 2:31 pm

Postby Sarah » Fri Nov 19, 2004 12:07 pm


Thank you for your post

I have tried to recreate this problem, however have no problems with recording with 100ms time intervals.

If you could send a file of what you are seeing to tech@picotech.com then we will be able to better investigate this problem.

Best Regards

Return to PicoLog

Who is online

Users browsing this forum: No registered users and 1 guest