Test and Measurement Forum

Thermocouple wire length

Post any questions about our serial port products

Thermocouple wire length

Postby chrich » Tue Nov 16, 2004 10:47 am

I am currently setting up a test to measure 8 channels temperature on a TC-08. The PC is 5.5m away from the oven I'm using.
Is there a maximum length of thermocouple wire?
I do have an ancient laptop, but it only has no CD drive. I have tried to transfer the software from PC to laptop using floppys but failed. :?:
I look forward to hearing from you soon.
Posts: 1
Joined: Tue Nov 16, 2004 10:35 am
Location: UK

Postby Sarah » Tue Nov 16, 2004 3:05 pm


Thank you for your post.

If your laptop has internet connection then I would suggest downloading the software. Otherwise I would suggest that trying again with floppy disks is the best way - unpack the self extracting file manually, then copy across the individual files on floppys, once this is done, run setup.exe.

It is advisable not to use thermocouple wires that are too long, however I would suggest that a distance of 5.5m should be fine. If you use high quality wire then this will minimise the risk of interferance.

Hope this helps

Best Regards

Return to Serial Port Products

Who is online

Users browsing this forum: No registered users and 0 guests