Data Loggers

Which product is right for your exact requirements
Post Reply
Posts: 0
Joined: Fri Feb 15, 2013 11:31 am

Data Loggers

Post by Plantimpact » Fri Feb 15, 2013 11:52 am


I require a data logger that will allow me to record pH, temperature, torque and rpm from a separate pH meter, temperature sensor, and overhead mixer onto one laptop. The mixers I have seen largely use RS232 cables for connecting with other devices, are there pico data loggers that use that cable and can accept and collate four data streams and present that data in a user friendly format?



Advanced User
Advanced User
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Re: Data Loggers

Post by PeterF » Mon Feb 18, 2013 3:21 pm

Pico data loggers accept analogue data input only (volts, current, etc) not digital. As long as all your sensors output in some form of analogue way, one of our Pico Loggers should be able to collect your data, display it and save to hard drive. The most usual analogue types are:-
Current (including 4-20mA)
Wheatstone bridge differential input.
Please contact us again if you have any other questions.

Post Reply