Pico scope softwarw with MS excel

Forum for discussing PicoScope (version 5)
Post Reply
arielmedina
Active User
Active User
Posts: 17
Joined: Thu Nov 11, 2004 2:40 pm

Pico scope softwarw with MS excel

Post by arielmedina » Thu Nov 11, 2004 2:48 pm

We have bought a ADC-212 / 50 DSO and we are using it with very good results.

Using it with MS Excel we are copy data and paste it in "special paste", so we are
getting the values in each cell. This value is updated as well as is actualized on
the DSO screen.

We need to froze the cell value of a cell when certain conditions are given, and
after that we need to keep aquiring data in the others cell.

Do you know how to do it?

We will appreciate your assistance.

Regards,

Ariel Medina
arielmedina@web-mail.com.ar

Sarah

Post by Sarah » Fri Nov 12, 2004 9:37 am

Hi

Thank you for your post.

Are you controlling the ADC directly from Excel or are you pasting in the data after?

I think the main possibility for achieving your aim would be to control the ADC from Excel using a macro and then write the programming so that it did as you desire. Some basic Excel examples and the relevant drivers are available for download from our website at:

http://www.picotech.com/software.html

Hope this helps

Best Regards

Post Reply