Test and Measurement Forum

PICO Parallel to USB adapter

Post any questions about our parallel port products

PICO Parallel to USB adapter

Postby glenn.pearce » Sat Feb 02, 2013 1:39 pm

Please can any one tell me if the PICO Parallel to USB adapters can be used with non-PICO products, e.g. printers?

I am trying to do some work with Parallel Port Jtag and a Parallel Port to USB adapter would be a very useful addition to the project.

The devices I have, which I bought several years ago, are labelled "USB Parallel Port QMR77/227". They look the same as the PP196 pictured below.

Image

Many thanks.
glenn.pearce
Newbie
 
Posts: 0
Joined: Thu Aug 28, 2008 11:12 am

Re: PICO Parallel to USB adapter

Postby Hitesh » Tue Feb 05, 2013 12:48 pm

Hi Glenn,

It's not something we have tried here.

You're welcome to try it and post back here to provide information on whether it works or not. You will need to install the driver by installing PicoScope 5 or PicoLog on your PC.

We can only provide support where the device is being used with one of our Products.

Best wishes,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 1997
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to Parallel Port Products

Who is online

Users browsing this forum: No registered users and 0 guests