Test and Measurement Forum

case for 3206 MSO

Post any questions you may have about our current range of oscilloscopes

case for 3206 MSO

Postby blachanc » Fri Feb 01, 2013 3:05 pm

Hi,
Greetings from Canada,

I just ordered a 3206 MSO from your Canadian distributor (interworld).
From the description, I understand that the PicoScope Carry Case is not
compatible with my scope.

Do you have plans to build a case for the MSO series, or do you have any
generic case that you know other customers are using.

Regards,

Benoit
blachanc
Newbie
 
Posts: 0
Joined: Fri Feb 01, 2013 2:49 pm

Re: case for 3206 MSO

Postby Hitesh » Tue Feb 05, 2013 12:06 pm

Hi Benoit,

There are no current plans to provide a carry case for the 3000 MSO products.

The only option at this moment would be cut out a section of the foam to accomodate the extra BNC connector on the rear of the product.

Hope this helps.
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2058
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: case for 3206 MSO

Postby blachanc » Tue Feb 12, 2013 5:03 am

I received the scope & case today.

You were right,
I used an old fashion razor to cut the foam in the front and in the back of the picoscope case.
I am left with 1/4 inches from the back, but this is fine, as the back of the case is lying against the padding.

Ben
blachanc
Newbie
 
Posts: 0
Joined: Fri Feb 01, 2013 2:49 pm

Re: case for 3206 MSO

Postby Hans Inoue » Wed Apr 01, 2015 9:31 pm

I purchased 3403D. Which carry case is fit? Give me a parts No..
Hans Inoue
Newbie
 
Posts: 0
Joined: Wed Apr 01, 2015 9:28 pm

Re: case for 3206 MSO

Postby Hitesh » Tue Apr 07, 2015 1:41 pm

Hi Hans,

Could you please e-mail support@picotech.com and we will look to assist you further.

Regards,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2058
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests