Is the TA095 compatible with the ADC-20?
If not, is there a way to modify it so that it can be used.
Can you recommend ANY accelerometers that are compatible with this device?
Compatibility
Re: Compatibility
Hi,
The ADC-20 & ADC-24 loggers are not compatible with the accelerometers your describe (IEPE accelerometers), because the loggers are far too slow to respond to the high frequencies measured. The loggers can only respond to a few Hz at most.
What you require is one of our dedicated IEPE oscilloscopes and matching IEPE accelerometers:-
http://www.picotech.com/picoscope4224IE ... tions.html
http://www.picotech.com/picoscope4000-a ... html#TA095
This two channel scope can accept input from any IEPE compliant accelerometer and it can also supply the necessary power to energise it.
Please contact me again if you have any other questions.
Regards,
PeterF.
The ADC-20 & ADC-24 loggers are not compatible with the accelerometers your describe (IEPE accelerometers), because the loggers are far too slow to respond to the high frequencies measured. The loggers can only respond to a few Hz at most.
What you require is one of our dedicated IEPE oscilloscopes and matching IEPE accelerometers:-
http://www.picotech.com/picoscope4224IE ... tions.html
http://www.picotech.com/picoscope4000-a ... html#TA095
This two channel scope can accept input from any IEPE compliant accelerometer and it can also supply the necessary power to energise it.
Please contact me again if you have any other questions.
Regards,
PeterF.