TC-O8invalid file format

Post any questions you may have about our current range of USB data loggers
Post Reply
ritec
Newbie
Posts: 0
Joined: Sun Jan 06, 2013 11:17 am

TC-O8invalid file format

Post by ritec » Tue Jan 08, 2013 6:36 pm

I set up the pico to run in startup and keep the same configuration but start with a new data file, i get the massage 'invalid file format' - r "C:\test.plw" any ideas.

Ritec

Martyn
Site Admin
Site Admin
Posts: 3229
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: TC-O8invalid file format

Post by Martyn » Thu Jan 10, 2013 11:19 am

I believe you have received an email from support explaining that you need to use a pls file to start up from and not plw
Martyn
Technical Support Manager

Post Reply