TC-08 Configuration

Which product is right for your exact requirements
Post Reply
xcel
User
User
Posts: 3
Joined: Sun Nov 07, 2004 2:39 pm
Location: Illinois, USA

TC-08 Configuration

Post by xcel » Tue Nov 09, 2004 6:15 am

Is there a way to configure one of the channels on the TC-08 so it may start and stop the data acquisition recording software upon closing/opening remote relay contacts?

Sarah

Post by Sarah » Tue Nov 09, 2004 12:47 pm

Hi

Thank you for your post.

You could use the trigger function to start the recording with the TC-08, however you cannot then stop the recording. If you know how long the event occurs you can set the number of samples so that it records the correct length of time.

Hope this helps

Best Regards

xcel
User
User
Posts: 3
Joined: Sun Nov 07, 2004 2:39 pm
Location: Illinois, USA

TC-08 Configuration

Post by xcel » Tue Nov 09, 2004 1:55 pm

:P Thank you for the idea, Sarah. I wish I would have thought of that!

Post Reply