Test and Measurement Forum

Is there an Icinga/Nagios Plugin to Monitor a PT-104?

Post general discussions on using our drivers to write your own software here

Is there an Icinga/Nagios Plugin to Monitor a PT-104?

Postby gallmetzerm » Wed Dec 12, 2012 10:24 am

Hi everybody,

We need to integrate several temperature sensors attached to a PT-104 into our central monitoring solution Icinga. The PT-104 can be accessed via ethernet. We are currently running the PicoLog Recorder, capture the individual channels and process the data manually.

The PT-104 should be constantly, automatically and regularly polled by Icinga (to avoid measurment loss, human error and to make our work easier).

Icinga is running on a linux server and the Icinga/Nagios plugin is required to run on linux as well.

The search in this forum/google unfortunately showed, that the linux support for the PT-104 is not - yet - available and that there are no Icinga/Nagios plugins (at least i haven't found any related posts).

Please, prove me wrong ;-)

Many thanks in advance,

Markus
gallmetzerm
Newbie
 
Posts: 0
Joined: Wed Dec 12, 2012 9:47 am

Re: Is there an Icinga/Nagios Plugin to Monitor a PT-104?

Postby Martyn » Thu Dec 13, 2012 11:05 am

There is no Linux support for this device, and no Icinga/Nagios plugins.

Sorry
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2350
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Is there an Icinga/Nagios Plugin to Monitor a PT-104?

Postby gallmetzerm » Thu Dec 13, 2012 11:37 am

Hi Martyn,

i feared that. Thank you. We'll read us again in the C/C++ board then ;-)

Kind regards,

Markus
gallmetzerm
Newbie
 
Posts: 0
Joined: Wed Dec 12, 2012 9:47 am


Return to General Software Discussions

Who is online

Users browsing this forum: No registered users and 0 guests