Using TC-08 with Omega extreme thermocouple probes

Which product is right for your exact requirements
Post Reply
oyalhi
User
User
Posts: 2
Joined: Wed Nov 03, 2004 6:40 pm
Location: Istanbul, Turkey
Contact:

Using TC-08 with Omega extreme thermocouple probes

Post by oyalhi » Wed Nov 03, 2004 6:53 pm

:?: I like the sound of the USB TC-08 and considering buying it. However, I am curious if I could use this product with Omega's extreme thermocouple probes.

I need to read temperatures between 500 °C and 1200 °C. Can you give me advise on which thermocouple to use with the correct coding (for sheath material, insulation material, sheath diameter, thermocouple wire gauge, insulation and termination). Termination code being the most important as it will be connected to your device.

The internet site can be found here:

http://www.omega.com/ppt/pptsc.asp?ref= ... Nav=tema06

Thank you in advance,

Omer YALHI

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer » Fri Nov 05, 2004 9:52 am

Hi,

Thank you for your email. Unfortunately, I do not know enough about the omega thermocouples to advise you cortrectly, but I would advise you to contact:

www.kalstead.co.uk

They will be able to help you greatly with your questions and they are familiar with out TC-08.

Best regards,
Regards,

Mark Spencer

oyalhi
User
User
Posts: 2
Joined: Wed Nov 03, 2004 6:40 pm
Location: Istanbul, Turkey
Contact:

Post by oyalhi » Fri Nov 05, 2004 10:31 am

Thank you for the reply. The link does not work however:

www.kalstead.co.uk

Sarah

Post by Sarah » Tue Nov 09, 2004 12:45 pm

Hi

Sorry about that, the correct link is:

http://www.kalestead.co.uk

Hope this helps

Best Regards

Post Reply