Test and Measurement Forum

what do i need

Which product is right for your exact requirements

what do i need

Postby JOANNE » Mon Nov 01, 2004 3:38 pm

I am looking for the software and adapter to plug into my laptop and a pressure transducer to chart pressure. It needs to be accurate and tke many points as I am trying to determine which piston is bad on a hydraulic piston pump. Which product would you recommend?
Joanne
JOANNE
User
User
 
Posts: 2
Joined: Tue Oct 26, 2004 1:37 pm

Postby markspencer » Tue Nov 02, 2004 11:06 am

Hi,

Thank you for your post.

I would recommend that you consider the ADC-212/3. This unit has two channels and multiple voltage ranges. It can be used in Picoscope or Picolog to look at fast events.

Unfortunately, we are do not sell pressure sensor, but you could try:

rswww.com
www.farnell.com

Best regards,
Regards,

Mark Spencer
User avatar
markspencer
Site Admin
Site Admin
 
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Postby JOANNE » Tue Nov 02, 2004 9:21 pm

The pressure transducer is not a problem but I have a few questions about the ADC-212/3. Does it come with the adapter to plug the transducer into or is it just the software. Do I require any other parts? Where can I find information on this on the website?
Joanne
JOANNE
User
User
 
Posts: 2
Joined: Tue Oct 26, 2004 1:37 pm

Postby markspencer » Fri Nov 05, 2004 8:13 am

Hi,

Thank you for your email.

The ADC-212/3 does not come with any connectors for connecting the transducer or any other sensor to it. It does come with a power adapter, parallel cable for connecting it to your PC and the software.

All the details about the ADC-212/3 can be found at:

http://www.picotech.com/digital_oscilloscope.html

Best regards,
Regards,

Mark Spencer
User avatar
markspencer
Site Admin
Site Admin
 
Posts: 598
Joined: Wed May 07, 2003 9:45 am


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests