ACD42 on Windows 2000

Having problems ? let us know the details here
Post Reply
T.K
Newbie
Posts: 0
Joined: Fri Nov 09, 2012 2:16 pm

ACD42 on Windows 2000

Post by T.K » Fri Nov 09, 2012 2:49 pm

Hi all,

I am trying to set up an old ADC42 to run on windows 2000, as it's the only laptop I have with a parallel port.

I have downloaded and installed PicoFull_r5_16_2. When in PWL Recorder, on the Converter Details window, I select ADC42 on LPT1 and am given the following device status warning 'ACD10/12/40/42 Driver V3.2 pico.sys not found'

pico.sys can be found in WINDOWS/SYSTEMS32/DRIVERS

I'de be very grateful of some pointers.

Thanks, Tom,

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: ACD42 on Windows 2000

Post by ziko » Tue Nov 13, 2012 5:09 pm

Hi Tom,

Could you try the file attached and choose option 3 when you run it. I have renamed the extension the file and zipped it , you will need to unzip and then change the file extension to be .exe

Regards
Attachments
ServiceControl.zip
(144.66 KiB) Downloaded 166 times
Ziko

Technical Specialist

Post Reply