PT-104 LabVIEW PT104.dll for 64-bit system

Post your LabVIEW discussions here
Post Reply
Schnobl
Newbie
Posts: 0
Joined: Sun Nov 04, 2012 7:21 pm

PT-104 LabVIEW PT104.dll for 64-bit system

Post by Schnobl » Sun Nov 04, 2012 7:33 pm

I like to use LabVIEW 2011 (64-bit Version) to measure temperature with the PT-104 data logger.
In the System-Requirements you wrote, that it is possible to work with 64-bit Systems. I tried it with your program examples from the Software Development Kit (SDK). But if I use the the PT104.dll, I get the information that this dll is only for 32-bit Versions.

How can I use my 64-bit LabVIEW with the PT-104 over ethernet?

Thank you for an answer.

Hitesh
Site Admin
Site Admin
Posts: 2845
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: PT-104 LabVIEW PT104.dll for 64-bit system

Post by Hitesh » Mon Nov 05, 2012 9:56 am

Hi Schnobl,

The dll for the USB PT-104 is 32-bit. It is the PicoLog software that is compatible with 64-bit versions of Windows but it still uses the 32-bit dll.

We are looking into 64-bit dlls but I can't advise on timescales at the present moment.

Best wishes,
Hitesh

Technical Support Engineer

ThibautTrad
Newbie
Posts: 0
Joined: Thu Oct 05, 2017 9:49 am

Re: PT-104 LabVIEW PT104.dll for 64-bit system

Post by ThibautTrad » Thu Oct 05, 2017 9:56 am

Hi,
Today, is there a PT104.dll 64 bits version to use with Labview?

Thank you for an answer.

Martyn
Site Admin
Site Admin
Posts: 3372
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: PT-104 LabVIEW PT104.dll for 64-bit system

Post by Martyn » Thu Oct 05, 2017 10:50 am

If you select and install the 64bit SDK from the downloads tab at the top of the page you will have what you need.
Martyn
Technical Support Manager

Post Reply