Test and Measurement Forum

ADC24 Differential Mode

Post any questions you may have about our current range of USB data loggers

ADC24 Differential Mode

Postby Davep » Thu Sep 20, 2012 10:52 am

When using the ADC24 in differential mode to measure up to a 5V differential voltage (with variable common mode voltage from 0 to 16V) -

are both channel 1 and channel 2 (channel -1) fitted with identical 2:1 resistor dividers as would be used if the 5V was measured single ended?
Posts: 0
Joined: Thu Sep 20, 2012 10:46 am

Re: ADC24 Differential Mode

Postby Martyn » Mon Sep 24, 2012 8:29 am

Followed on here topic11357.html
Technical Support Manager
Site Admin
Site Admin
Posts: 3111
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to USB PC Data Loggers

Who is online

Users browsing this forum: No registered users and 1 guest