Test and Measurement Forum

AWG 3000 VI

Post your LabVIEW discussions here

AWG 3000 VI

Postby Joachim198 » Tue Sep 18, 2012 7:59 am

Hi is there an Example VI of using the internal AWG 3000 VI. I tried to use the internal FrequencyGenerator of the 3204B but the output stops after a sec. Even a whileloop around the AWG VI doesnt change anything. Has someone already built a running AWG VI for using the internal Generator without an AWG signal file.

best regards
Posts: 0
Joined: Thu Sep 13, 2012 8:30 am

Re: AWG 3000 VI

Postby Hitesh » Wed Sep 19, 2012 1:26 pm

Hi Joachim,

You should be able to run the AWG by setting up the following structure:

Open Unit blocks -> AWG block -> Loop with Stop button -> Close Unit block

You should be able to call the ps3000aSetSigGenBuiltIn function with the relevant parameters - what are the parameters that you are setting? Have you set values for shots by any chance?

Please ensure that you have the latest build of the SDK from our website http://www.picotech.com/software.html


Technical Support Engineer
Site Admin
Site Admin
Posts: 2791
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 0 guests