Test and Measurement Forum

Can't find converter

Forum for discussing PicoLog

Can't find converter

Postby gugge_x » Mon Aug 27, 2012 2:48 pm

Hi!

I have a PicoScope 3205B which i'm trying to use with PicoLog. But when I'm choosing PicoScope 3000-series in the setup, no devices appears. When a press the Refresh-button the programs searches a second or two, but dosn't find anything. I'm currently not running PicoScope and the oscilloscopes appears in the device manger. I have no problem running PicoScope 6 with my device.

Best Regards
Gustav Rydahl
gugge_x
Newbie
 
Posts: 0
Joined: Thu Aug 16, 2012 6:30 am

Re: Can't find converter

Postby Martyn » Tue Aug 28, 2012 7:19 am

The 3205B is one of the newer 3000 series scopes, it will not work with our old PicoLog software which is why it isn't found.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2348
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Can't find converter

Postby gugge_x » Tue Aug 28, 2012 7:38 am

Okey, have you any new PicoLog software or do you have any other idéa of how I should do to log data? I want to log a steady DC level for about 24 hours. I'm logging drift of a transducer.

Best Regards
Gustav
gugge_x
Newbie
 
Posts: 0
Joined: Thu Aug 16, 2012 6:30 am

Re: Can't find converter

Postby Martyn » Tue Aug 28, 2012 10:37 am

You can do some simple logging by using the Alarms feature of the Picoscope6 software. Take a look at http://www.picoscope.tv/general/using-alarms.html You will need to chose the scope settings carefully as a great deal of data can be provided by the scope in 24 hours.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2348
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to PicoLog

Who is online

Users browsing this forum: No registered users and 0 guests