Saving the waveform on a mark fail alarm

Post your LabVIEW discussions here
Post Reply
TomT
Newbie
Posts: 0
Joined: Tue Aug 21, 2012 7:23 am

Saving the waveform on a mark fail alarm

Post by TomT » Tue Aug 21, 2012 7:34 am

Using a picscope 2205 and labview 2011 how does one do the programmatic equivalent of setting up a mask and then saving the waveform in the current buffer to a csv file whenever the alarm is triggered by a mask fail ? Thanks for your help. TomT

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: Saving the waveform on a mark fail alarm

Post by ziko » Tue Aug 21, 2012 12:45 pm

Hi,

These features you are talking about are PicoScope 6 features and not within the driver, you would have to be able to create your own masks and your own alarming really.

Regards
Ziko

Technical Specialist

benscarrow
Newbie
Posts: 0
Joined: Fri Dec 11, 2009 10:53 am

Re: Saving the waveform on a mark fail alarm

Post by benscarrow » Mon May 20, 2013 8:36 am

As anyone been able to do this?

Martyn
Site Admin
Site Admin
Posts: 3333
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Saving the waveform on a mark fail alarm

Post by Martyn » Wed May 29, 2013 10:05 am

I haven't heard any reports of anyone doing this, although it is possible.
Martyn
Technical Support Manager

Post Reply