Test and Measurement Forum

AWG of Picoscope 2204

Post any questions you may have about our current range of oscilloscopes

AWG of Picoscope 2204

Postby damphibk » Thu Aug 16, 2012 6:10 pm

Hi,

Help me! I generated a 1 kHz square signal by AWG but it is not square on scope when using A channel to capture the signal. I do not know why.

I use the Probes with 100pF Input Capacitance.

What should I do?
damphibk
Newbie
 
Posts: 0
Joined: Thu Aug 16, 2012 5:53 pm

Re: AWG of Picoscope 2204

Postby Martyn » Fri Aug 17, 2012 10:47 am

Please post your waveforms and we will be able to tell you what the issue is.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2355
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: AWG of Picoscope 2204

Postby damphibk » Wed Oct 24, 2012 4:30 am

Sorry for the delay,

Because of GND. When i measure signal, the pannel/pcb/circuit do not grounding.
damphibk
Newbie
 
Posts: 0
Joined: Thu Aug 16, 2012 5:53 pm

Re: AWG of Picoscope 2204

Postby Martyn » Thu Oct 25, 2012 10:23 am

If you are still have problems please send in details of your generated signal and the scope settings, the easiest way to do this is to post a psdata file.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2355
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests