No Vertical Cursors (freq/time measuremens)?

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
MikeSD
Newbie
Posts: 0
Joined: Tue Jul 24, 2012 9:28 pm

No Vertical Cursors (freq/time measuremens)?

Post by MikeSD » Mon Jul 30, 2012 4:06 pm

I'm having a problem. I can get the horizontal cursors, for measuring delta V but can't get any vertical cursors, for measuring time or frequencies. I have seen that this was possible on older versions of PicoScope, according to what I've read.

How does one get vertical cursors, in PicoScope 6.0?
Is there any way to get vertical and horizontal cursors at the same time?

Martyn
Site Admin
Site Admin
Posts: 3225
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: No Vertical Cursors (freq/time measuremens)?

Post by Martyn » Tue Jul 31, 2012 6:07 am

The horizontal cursors are the little coloured squares (matching the channel colour) at the top left, or top right of the screen window. The horizontal cursors are the little white square at the bottom left of the trace window, just inside the scales. Just click and drag.
Martyn
Technical Support Manager

Post Reply