Test and Measurement Forum

4424 software installation

Forum for discussing PicoScope version 6 (non-automotive version)

4424 software installation

Postby elirub » Fri Jul 20, 2012 1:43 pm

Trying to install software for 4424.
Installer asks for "Device". In drop-down list there is no 4000 series.
Checked for larest software version, however, the report is that the version on the CD is the latest.
What do I put as "Device" to continue installation?
elirub
Newbie
 
Posts: 0
Joined: Fri Jul 20, 2012 1:32 pm

Re: 4424 software installation

Postby Martyn » Fri Jul 20, 2012 1:45 pm

That sounds like you are trying to install Picolog software.

The 4424 only works with PicoScope6 software so if you install and run this it should find the scope.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2339
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 4424 software installation

Postby elirub » Fri Jul 20, 2012 2:25 pm

Thanks Martyn
The scope works now.
Would appreciate to be able to use it also as a 4 channal data logger.
Shouldn't I be able to use the PicoLog?
elirub
Newbie
 
Posts: 0
Joined: Fri Jul 20, 2012 1:32 pm

Re: 4424 software installation

Postby Martyn » Mon Jul 23, 2012 7:43 am

Our newer scopes are not supported under Picolog.

However using the alarms features and saving data when buffers are full it is possible to configure PicoScope 6 to log data over extended periods of time. Please check out the videos at http://www.picoscope.tv/general/using-alarms.html
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2339
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 1 guest