3205A Detection

Post any questions you may have about our current range of oscilloscopes
Post Reply
Posts: 0
Joined: Fri Jun 29, 2012 8:16 am

3205A Detection

Post by whitry » Fri Jun 29, 2012 8:32 am

Hi i have got a new 3205A pc oscilloscope. I first tried using the included software and then the current release of picoscope6, but the same problem reoccurs where windows displays a message saying USB not recognized. I have tried to manually allocate the driver to the device but its still not working. I want to install it on a machine running windows7 32bit. I have two other machines running windows 7 64bit and one still on xp, with the same error. I have tried reinstalling waiting till software is installed then rebooting as per instructions, but i still have the same detection problem. Any help would be greatly appreciated

Regards Ryan

Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: 3205A Detection

Post by ziko » Fri Jun 29, 2012 3:33 pm

Hi Ryan,

If you have tried it on more than one machine and it is not recognised then the probably could either be a USB cable or the device itself.

Please email support@picotech.com

Kind regards

Technical Specialist

Post Reply