Another question on PP264

Which product is right for your exact requirements
Post Reply
swg
User
User
Posts: 3
Joined: Sat Oct 09, 2004 3:03 am

Another question on PP264

Post by swg » Sat Oct 09, 2004 3:49 am

Sorry I forgot to include these questions in my last post. What is the max cable size the PP264 can accept? What is the length of the BNC lead? How is the device powered? And what is max current and voltage the device is protected to? Thanks again, Steve

Sarah

Post by Sarah » Mon Oct 11, 2004 10:42 am

Hi Steve

The PP264 should not be used on voltages higher than 300V DC or 240V rms AC.

The clamp can hold cable of up to 9mm in thickness and it has a cable of just under 2.5m long.

Hope this helps

Best Regards

swg
User
User
Posts: 3
Joined: Sat Oct 09, 2004 3:03 am

Post by swg » Mon Oct 11, 2004 7:03 pm

Thanks for the quick response Steve

Post Reply