Test and Measurement Forum

Software for auto printout after logging complete.

Post general discussions on using our drivers to write your own software here

Software for auto printout after logging complete.

Postby paddy123 » Thu Jun 14, 2012 6:04 pm


I presently use an ADC-24 for general data logging purposes.
I now have a need to data log on a machine using about 7 sensors which will preferably be wired
differentially.The logging will start via a digital input and will last about 5 minutes with sampling
at about 10/sec on all but one channel which needs to be at 100/sec.Logging will stop when
a second digital input is triggered.
When the stop signal is detected I will also need to automatically print out a graph of just two of the
channels over the logging period.
What software Pico or third party would allow me to do this( with the minimum of effort!) ?
I am happy to use a different Pico unit if necessary.

Posts: 0
Joined: Thu Jun 14, 2012 5:47 pm

Re: Software for auto printout after logging complete.

Postby Martyn » Fri Jun 15, 2012 2:55 pm

Can you please send this request to [url]support@picotech.com[/url]
Technical Specialist
Site Admin
Site Admin
Posts: 2314
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to General Software Discussions

Who is online

Users browsing this forum: No registered users and 4 guests