FLUKE 97 SCOPE METER

Post any questions you may have about our current range of oscilloscopes
Post Reply
thejerryguy
Newbie
Posts: 0
Joined: Fri Jun 08, 2012 11:56 am

FLUKE 97 SCOPE METER

Post by thejerryguy »

I am using Fluke 97 Scope meter for AVR micro controllers.
----------------------
Bandwidth 50 MHz
Number of Channels 2 ch
Simultaneous Maximum Sampling Rate/ch 25 MSa/s
One ch. only max. sampling rate 25 MSa/s
Max. Single Shot bandwidth 50 MHz
Max. Record Length 512 pt/sec
-------------------
Plan to buy the PicoScope 2205 USB Mixed–Signal Oscilloscope Kit

I assume picoScope 2205 will work as well as the Fluke 97?

Martyn
Site Admin
Site Admin
Posts: 4499
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: FLUKE 97 SCOPE METER

Post by Martyn »

The bandwidth of the 2205MSO is only 25MHz but it has greater sampling rate of 100MSa/s or more depending upon active channels. The full specification can be found here http://www.picotech.com/picoscope2205ms ... tions.html
Martyn
Technical Support Manager

Post Reply