Test and Measurement Forum

FLUKE 97 SCOPE METER

Post any questions you may have about our current range of oscilloscopes

FLUKE 97 SCOPE METER

Postby thejerryguy » Fri Jun 08, 2012 12:02 pm

I am using Fluke 97 Scope meter for AVR micro controllers.
----------------------
Bandwidth 50 MHz
Number of Channels 2 ch
Simultaneous Maximum Sampling Rate/ch 25 MSa/s
One ch. only max. sampling rate 25 MSa/s
Max. Single Shot bandwidth 50 MHz
Max. Record Length 512 pt/sec
-------------------
Plan to buy the PicoScope 2205 USB Mixed–Signal Oscilloscope Kit

I assume picoScope 2205 will work as well as the Fluke 97?
thejerryguy
Newbie
 
Posts: 0
Joined: Fri Jun 08, 2012 11:56 am

Re: FLUKE 97 SCOPE METER

Postby Martyn » Fri Jun 08, 2012 12:15 pm

The bandwidth of the 2205MSO is only 25MHz but it has greater sampling rate of 100MSa/s or more depending upon active channels. The full specification can be found here http://www.picotech.com/picoscope2205mso-specifications.html
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2339
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests