Picolog spreadsheet export

Forum for discussing PicoLog
Post Reply
paolob
Newbie
Posts: 0
Joined: Mon Jun 04, 2012 10:14 am

Picolog spreadsheet export

Post by paolob » Mon Jun 04, 2012 2:29 pm

Hi,
i have this configuration:
3 PT-104 scanning every 5 seconds on 12 channels.
I set the Picolog to show value every 120 values (i.e. 10 minutes).
On Picolog spreatsheet i see in the first column (correctly)
600
1200
1800
and so on...
but when i select with click and drag, copy and paste data on Excel i see in first column:
600
595
600

1200
1800

It works well if i select using the selection button on the command bar.

Why data are not exported correctly?

Thanks,

P.

Hitesh
Site Admin
Site Admin
Posts: 2829
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Picolog spreadsheet export

Post by Hitesh » Wed Jun 06, 2012 3:59 pm

Hi Paolob,

Which version of PicoLog are you using? Have you tried the most recent (R5.22.6)?

If you can send an example data file to support@picotech.com, we can test it here. How are you copying and pasting the selection into Excel? By clicking on the 'Copy to Clipboard' button in Spreadsheet view?

Regards,
Hitesh

Technical Support Engineer

Post Reply