Test and Measurement Forum

Problem with Lab view connection

Post your LabVIEW discussions here

Problem with Lab view connection

Postby Adam » Sat Jun 02, 2012 8:12 pm

I have the PicoScope 3204. R6.6.28 and the PicoScope installed last drivers. When you start PicoScope3000aExampleStreaming.vi receives: "PICO_INVALID_CHANNEL: Check That at least one channel is enabled, that 'channel selections are correct And that the "four channel device" setting is correct." If I tried to run only the function OpenPS3000, there is no error but my PicoScope red LED stops flashing. And when I run the program again PICO_NOT_FOUND : (
Aaand next issues PicoLog recorder does not see my oscilloscope.
OS win 7 64bit
Lab view 2011 SP1
I'll be very grateful for your help.
Posts: 0
Joined: Sat Jun 02, 2012 7:43 pm

Re: Problem with Lab view connection

Postby Martyn » Wed Jun 06, 2012 12:50 pm

Do you have a 3204 or a 3204a, they have different drivers and only the 3204 will work with Picolog not the 3204a.
Technical Support Manager
Site Admin
Site Admin
Posts: 3156
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 0 guests