pico scope 3205

Which product is right for your exact requirements
Post Reply
esami
User
User
Posts: 3
Joined: Fri Oct 01, 2004 1:48 pm

pico scope 3205

Post by esami »

I'm interested in your scope 3205 and I want to know what is the maximum data rate between the pc and the scope ( and what is the recomended PC configuration) in these two modes

1- save to the disk mode

2- when the data is displayed real time on the screen

Sarah

Post by Sarah »

Hi

Thank you for your post.

The data transfer of the PS3205 depends on whether you are using USB1.1 or USB2. The maximum data transfer rate of USB2 is 480Mb per second however the rate used by the 3205 depends on the sampling rate that is being used. It should not vary between modes, when used in Picoscope it data is always displayed in real time. If you are using Picolog in fast block mode then the time taken to download a full buffer and rearm can be from 300ms to one second, this will depend on the speed of the computer.

Hope this helps

Best Regards

Post Reply