Test and Measurement Forum

error 13 HO SO

Post general discussions on using our drivers to write your own software here

error 13 HO SO

Postby Michel JOSEPH » Wed Sep 29, 2004 12:20 pm

Hi,
I'm affraid because i can't use a sofware written on HP VEE with another PC.
I have loaded the last driver version on your web site.
Then I have modified the file adc200.vh to correct the routine by "__stdcall"
Using "ADC200.adc200_get_unit_info" the Str output terminal contains "error 13 (H0 S0).
After using other Adc200.run routine , VEE provocate the windows error

AppName: vee.exe AppVer: 6.0.1.0 ModName: adc20032.dll
ModVer: 4.0.0.0 Offset: 000072a8

Where is the error ?
Best regards,
Michel JOSEPH
Michel JOSEPH
User
User
 
Posts: 3
Joined: Tue Jun 08, 2004 8:54 am

Postby markspencer » Thu Sep 30, 2004 7:58 am

Hi,

I am sorry to hear that you are experiencing problems.

I would recommend that you download the latest version of Picoscope and install this on you PC. Once done use Picoscope and unit to check it is working correctly. When happy that it is correct copy the adc20032.dll form your Picoscope R5.11.03 directory into your HP VEE directory and try again.

Do not for get to reboot your PC after installing Picoscope.

Best regards,
Regards,

Mark Spencer
User avatar
markspencer
Site Admin
Site Admin
 
Posts: 598
Joined: Wed May 07, 2003 9:45 am


Return to General Software Discussions

Who is online

Users browsing this forum: No registered users and 2 guests