Test and Measurement Forum

CANbus in Serial Decoding Window

Forum for discussing PicoScope version 6 (non-automotive version)

CANbus in Serial Decoding Window

Postby Chris Stamford-Burrows » Tue May 08, 2012 3:25 pm

I am trying to decode data from an inclinometer, and while I am seeing digital CANHigh and CANLow data I cannot set up the serial decoding so that it reads the data coherently. I believe the sensor is at 125 kBit/s but I have also tried the other options of 250 and 500 that are available on the sensor.

I do get some data decoding but it seems to depend on the trigger point and/or the bit rate that I choose and/or the collection time. I have for reference the Demkonstration video, which is, of course perfect. :?

The data (if it is data) is coming in long bursts around 0.5 seconds long.

Any suggestions ??
Chris Stamford-Burrows
Posts: 6
Joined: Wed Feb 18, 2009 3:03 pm
Location: Asker, Norway

Re: CANbus in Serial Decoding Window

Postby Martyn » Wed May 09, 2012 7:21 am

Can you capture some data and then use File->SaveCurrentWaveformAs to save a psdata file which you can then post here for us to look at.
Technical Support Manager
Site Admin
Site Admin
Posts: 3217
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests