Test and Measurement Forum

Increasing the frequency of measurements

Increasing the frequency of measurements

Postby tbltbl » Thu Apr 26, 2012 1:18 pm

I need to measure faster than 1 measurement per minute and would like to use DDE to write the current value to Excel and then use VBA to produce a short term high speed logger ( one reading per 10 secs ) Unfortunately the function =EMW|Current!Value just returns #N/A in software version R5.21.3 I saw a post from 2008 stating exactly the same problem. has anything changed in the meantime, or is there perhaps another solution.

Richard
tbltbl
Newbie
 
Posts: 0
Joined: Thu Apr 26, 2012 1:05 pm

Re: Increasing the frequency of measurements

Postby Martyn » Tue May 01, 2012 2:42 pm

Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2346
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to Hardware

Who is online

Users browsing this forum: No registered users and 0 guests