Math channel operations

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
MrW
Newbie
Posts: 0
Joined: Mon Apr 16, 2012 8:31 am

Math channel operations

Post by MrW » Wed Apr 25, 2012 6:51 pm

Hello,
It would be extremely helpful if you could add Mod (reminder of division) operation to Match Channel Wizard.
Of course Round, Ceil and Floor functions would be useful also, but even Mod would do.
Currently there is no way I know of to isolate integer value from signal. Or is there?

Martyn
Site Admin
Site Admin
Posts: 3371
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Math channel operations

Post by Martyn » Tue May 01, 2012 8:42 am

Thanks for the suggestions, I will forward these to the development team for consideration.
Martyn
Technical Support Manager

MrW
Newbie
Posts: 0
Joined: Mon Apr 16, 2012 8:31 am

Re: Math channel operations

Post by MrW » Thu May 10, 2012 9:48 pm

Hello, I attached one case (of many) where Floor function would be helpful. It goes to xE-n mode due to unneeded precision. Floor(x*100)/100 would do the trick.
Attachments
rounding_needed.png
Example where rounding would be needed.

Post Reply