Test and Measurement Forum

data acqusition with picoscope 3224

Post your LabVIEW discussions here

data acqusition with picoscope 3224

Postby s.kavitha » Tue Apr 24, 2012 12:38 pm

hi i am doing project in labview for data acquisition with picoscope 3224,and the os is windows 7,32 bit.
when using ps3000_faststream.vi and it will not get the triggered waveform. In this vi the set_trigger function having parameters as threshold,delay,autotrigger are set to 0. is there any possible way to modify these parameter values to get triggered waveform or help me what are the other procedure to get triggered waveform.
trigger setting
(131.51 KiB) Downloaded 141 times
Posts: 0
Joined: Tue Apr 24, 2012 4:56 am

Re: data acqusition with picoscope 3224

Postby Hitesh » Wed Apr 25, 2012 4:29 pm

This is being answered in the following thread:


Technical Specialist
Pico Technology
Site Admin
Site Admin
Posts: 2024
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 0 guests