Problems with TC-08 USB

Post any questions you may have about our current range of USB data loggers
Post Reply
matomato
Newbie
Posts: 0
Joined: Fri Mar 23, 2012 11:11 am

Problems with TC-08 USB

Post by matomato »

Hi,
We have 3 TC-08 thermocouple Data loggers.
I have installed the software using the DVD received with the loggers.
When I open the PicoLogger Recorder\ New setting\ Converter details\ set the TC-08 (USB) as the converter type, click OK and receive a message "No unit has been selected".

The logger is connected to the pc and I don't understand what is wrong.
Any help???
Thanks


PS. I am using Windows XP

matomato

Hitesh

Re: Problems with TC-08 USB

Post by Hitesh »

Hi matomato,

Please check whether the devices have installed correctly by viewing the Device Manager window. The example below shows what you should see if one device has been installed correctly:
Device Manager showing TC-08
Device Manager showing TC-08
Did you install the software before plugging in the devices?

If there is a yellow circle with an exclamation mark next to the TC-08 entry, please right-click and uninstall the device(s), and unplug them. Next uninstall and reinstall the software.

Try also clicking 'Refresh' on the converter details box a few times if the devices have installed correctly.

Also, within the Recording dialog that appears after clicking File -> New Settings, ensure that the 'Use multiple converters' tickbox is selected.

Regards,

Post Reply