Agilent VEE 8.5 and USB Pt 104

Post general discussions on using our drivers to write your own software here
Post Reply
Posts: 0
Joined: Thu Mar 01, 2012 8:21 am

Agilent VEE 8.5 and USB Pt 104

Post by Ashen » Tue Mar 20, 2012 5:08 pm


I have an USB Pt 104 and I want to programm it with Agilent VEE 8.5 but i don't know how edit the file in .h for import the librarie.

Thank you for any help

Site Admin
Site Admin
Posts: 2846
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Agilent VEE 8.5 and USB Pt 104

Post by Hitesh » Thu Mar 22, 2012 4:14 pm

Hi Ashen,

Please try using the attached vh file from our USB TC-08 SDK as an example for the PT-104.

It looks as though you just need to take the function definitions and place them in your file e.g.

Code: Select all

short __stdcall UsbPt104OpenUnit (short *handle, char *serial);

short __stdcall UsbPt104CloseUnit (short handle);
USB TC-08 vh file.
(2.75 KiB) Downloaded 328 times
I hope this helps.

Technical Support Engineer

Post Reply