Chosing right equipment

Which product is right for your exact requirements
Post Reply
Posts: 0
Joined: Mon Mar 19, 2012 5:46 pm

Chosing right equipment

Post by dado_25 » Mon Mar 19, 2012 5:59 pm

Hi all!

I am interested in Pico osciloscopes but I am not sure which
model would be optimal for me maybe you can give me your opinion?
I am working with CAN bus systems and general marine engine monitoring
so I would like to buy model which cover bouth aplication.

Thanks for reply!

Site Admin
Site Admin
Posts: 3583
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Chosing right equipment

Post by Martyn » Tue Mar 20, 2012 7:54 am

I would suggest you need one of our Automotive Kits which are designed to measure and test virtually all of the electrical and electronic components and circuits in any modern vehicle including:
  • Ignition (primary and secondary)
    Injectors and fuel pumps
    Starter and charging circuits
    Batteries, alternators and starter motors
    Lambda, Airflow, knock and MAP sensors
    Glow plugs / timer relays
    CAN bus, LIN bus and FlexRay
Technical Support Manager

Post Reply