First byte I2C decoding error in v 6.6.16.12

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
Darko8
Newbie
Posts: 0
Joined: Wed Mar 14, 2012 1:36 pm

First byte I2C decoding error in v 6.6.16.12

Post by Darko8 »

Hello,

I noticed, that I2C address gets decoded wrong if first bit follows start condition in short time.
Attached please find captured data and image containing correct interpretation of captured waveform.

Greetings, Darko
Attachments
WronglyDecoded I2C ADDR BUG.psdata
(222.99 KiB) Downloaded 433 times
Image of captured I2C waveform with explanation
Image of captured I2C waveform with explanation

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: First byte I2C decoding error in v 6.6.16.12

Post by Martyn »

If you select Tools->SerialDecoding->Settings and change this to 8 bit read/write address it displays 70 as you would expect.
Martyn
Technical Support Manager

Post Reply