Test and Measurement Forum

4227 AWG short circuit proof ?

Post any questions you may have about our current range of oscilloscopes

4227 AWG short circuit proof ?

Postby modmix » Mon Feb 20, 2012 4:43 pm

Hi,
I guess, 4227 AWG port will behave at 50 ohm load as stated here: 3206 signal generator.
Pls, correct me in case I'm wrong.

Additional question: is the AWG port short circuit proof ? or will a short circuit at that port do some harm to the hardware?

TIA
Ulli
modmix
Newbie
 
Posts: 0
Joined: Mon Feb 20, 2012 4:36 pm

Re: 4227 AWG short circuit proof ?

Postby Martyn » Tue Feb 21, 2012 9:08 am

The specs for the 4227 can be found here http://www.picotech.com/picoscope4227-specifications.html so similar to the 3206
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2339
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 4227 AWG short circuit proof ?

Postby modmix » Tue Feb 21, 2012 11:33 am

Thanks, Martyn.
Should I find some hint for my short circuit proof question on that page?
Where?

Ulli
modmix
Newbie
 
Posts: 0
Joined: Mon Feb 20, 2012 4:36 pm

Re: 4227 AWG short circuit proof ?

Postby Martyn » Tue Feb 21, 2012 11:47 am

It can be shorted to ground without causing an issue.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2339
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests