Test and Measurement Forum

2104 Problem

Post any questions you may have about our current range of oscilloscopes

2104 Problem

Postby cypis » Wed Feb 01, 2012 4:00 pm

I have a problem with PicoScope 2104th When connected to a PC that looks like everything works, but I can not measure anything. Is it weird that if you short the probe tip to ground terminal line shows an oscilloscope-20mV instead of 0V. If I measure the voltage at 1.5 V battery in one direction is the measured voltage 1.6 V in the other direction 0.09 V. If you connect an oscilloscope to another computer, everything is fine.
Thank you for your answer.
Posts: 0
Joined: Wed Feb 01, 2012 2:44 pm

Re: 2104 Problem

Postby Hitesh » Fri Feb 03, 2012 5:35 pm

Hi cypis,

Which version of PicoScope are you running on your PC and which OS are you using?


Technical Support Engineer
Site Admin
Site Admin
Posts: 2791
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests