Soft improvement

Post any questions you may have about our current range of USB data loggers
Post Reply
Posts: 2
Joined: Wed May 04, 2005 2:08 am

Soft improvement

Post by Horacio » Mon Jan 30, 2012 1:42 pm

Hi PeterF:
I run the 1012 logger and Working with a Temperature Graphic when I click the View Option, I set the Graphic Option Window to:
Format: All traces in the same graph
Time axis scale: Scroll
Time format: Time of day
Vertical axis scale: Automatic

so far OK.
If I do a change in graph window like the + or - lens, automatically the graph option resets itself to:
Time axis: Scroll
Vertical axis: Manual

Then I have to go back and set it to automatic again.
The same for the Horizontal-Time axis. -Scroll-
This becomes to a real nuisance when the temperature scale being low varies very often.

Place an option in the Graph Options window to go back to previous set up and do not fall automatically in the manual option.

Could I change some parameters in some file and keep it as a private setup?

Waiting for your reply,


Site Admin
Site Admin
Posts: 3584
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Soft improvement

Post by Martyn » Fri Feb 10, 2012 10:50 am

Thank you for your feedback, I will pass the information on to the development team.
Technical Support Manager

Post Reply