Test and Measurement Forum

Problem with the measurements

Forum for discussing PicoScope version 6 (non-automotive version)

Problem with the measurements

Postby lautasche » Wed Jan 25, 2012 11:31 am

Hello, sorry for the inconvenience. I have the following problem, run the PicoScope with the mode spectrum and add a view scope. This was a high frequency measurement mode spectrum and a peak to peak in the light scope. My question was whether there is any way to pass data recorded measurements, as the need to excel in a table. The only way I found was to pass them one by one, but in many screens is very extensive.

Sorry if there is a syntax error is due to my lack of English.
lautasche
Newbie
 
Posts: 0
Joined: Wed Jan 25, 2012 11:17 am

Re: Problem with the measurements

Postby pkravt » Thu Jan 26, 2012 8:00 am

I have the same request:

I need to save measurements history, but for the scope signal, not the spectra view.
What I need is the history of signal maximum amplitudes, to turn the scope into amplitude
analyzer.

How can we do it?
pkravt
Newbie
 
Posts: 0
Joined: Thu Jan 26, 2012 7:54 am

Re: Problem with the measurements

Postby Martyn » Thu Jan 26, 2012 10:49 am

You could try Tools->Alarms to write data to a file on a given condition.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2280
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Problem with the measurements

Postby lautasche » Thu Jan 26, 2012 12:36 pm

Sorry, but i dont find the Alarms in Tools
lautasche
Newbie
 
Posts: 0
Joined: Wed Jan 25, 2012 11:17 am

Re: Problem with the measurements

Postby Martyn » Thu Jan 26, 2012 1:14 pm

Tools -> Alarms are menu items in PicoScope 6, the 5th menu item along the top (Tools) and the fifth item down the list (Alarms).

If you let me know the language you are using I could give the appropriate wording.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2280
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Problem with the measurements

Postby lautasche » Thu Jan 26, 2012 1:21 pm

Sorry again, i found Alarms. The problem is when the pico save the files. I select the option save as .csv or .txt but when i open the files, are emptys
lautasche
Newbie
 
Posts: 0
Joined: Wed Jan 25, 2012 11:17 am

Re: Problem with the measurements

Postby Martyn » Thu Jan 26, 2012 1:52 pm

Please check that your alarm condition is set as you require and, if it still does not produce valid data, use File->SaveCurrentWaveform to save a pssettings file. You can then send this file to support@picotech.com and I will be able to check what your alarm is doing.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2280
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Problem with the measurements

Postby lautasche » Thu Jan 26, 2012 2:14 pm

Martyn sorry again, but i have the same problem that this topic topic10429.html . Only i need save the values register in each measurement, for example: if i select Frequency, the value of frequency
lautasche
Newbie
 
Posts: 0
Joined: Wed Jan 25, 2012 11:17 am

Re: Problem with the measurements

Postby Martyn » Thu Jan 26, 2012 3:18 pm

As explained in the other thread that functionality is not available at present. The suggestion has been forwarded to the development team for consideration in a future release although I can't comment on when a decision will be made.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2280
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests