Test and Measurement Forum

Steaming mode in 3245

Forum for discussing PicoScope version 6 (non-automotive version)

Steaming mode in 3245

Postby gbgb » Thu Jan 19, 2012 11:52 am

I would like to make sure I understand the streaming mode and the "switch to slow speed" parameter:
1. When the sampling rate is FASTER than the parameter the scope switches from streaming to block. Correct?
2. What is the fastest sampling rate in streaming mode for the 3245 working with 2 and 3 channels?
gbgb
Newbie
 
Posts: 0
Joined: Thu Jan 19, 2012 11:29 am

Re: Steaming mode in 3245

Postby Martyn » Thu Jan 19, 2012 3:54 pm

I take it you mean 3425.

This is a feature of the Picoscope6 software which changes the mode from Streaming to Block according to the Slow Sampling Transmission setting for Collection Time. With the 3425 the quickest value that you can stream at is 100ms/div or 1s for a screen of data.

If you write your own software it is possible to stream data at faster rates than this subject to the host PC USB performance.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2287
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests