use 2 scopes simultaneus

Post any questions you may have about our current range of oscilloscopes
Post Reply
d_tomasi
Newbie
Posts: 0
Joined: Tue Jan 17, 2012 9:29 am

use 2 scopes simultaneus

Post by d_tomasi » Tue Jan 17, 2012 9:54 am

I have n.2 picoscope, n.1 3206 and n.1 3205, I can connect both on my computer, see signal in separate windows. I would like to interact measurement from one to the other, like math function from the signal of 3206 to the signals of 3205, is that possible ?

Martyn
Site Admin
Site Admin
Posts: 3345
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: use 2 scopes simultaneus

Post by Martyn » Tue Jan 17, 2012 10:21 am

Unfortunately it is not possible to have two oscilloscopes active in one window of Picoscope software.
Martyn
Technical Support Manager

Post Reply